The P42 Pico2 M.2 may look like an M.2 module, but it's actually a Raspberry Pi RP2350 development board in M.2 2230 form ...

Consultancy has designed a simple board called the Pico Indicator to add LEDs to the GPIO and power pins of the Raspberry Pi ...

If you’re into electronics, IoT, or DIY projects, you’ve probably heard about the ESP32. It’s one of the most powerful and affordable microcontrollers out there, packed with Wi-Fi, Bluetooth, multiple ...

A relay module is also connected to the ESP32’s GPIO 13, providing the ability to control external devices like additional lighting or security systems using gesture commands. The WS2812 LED strip is ...

Below, you can find our L298N Motor Driver Interfacing Circuit with Arduino. For demonstration purposes, I am going to utilize only one 12V DC motor in the Motor B pinout side. Now let’s discuss the ...

If no value is provided, the port will read the value from the GPIO register and return for the current pin. If a value is provided, the port will write the value to the GPIO register. Valid pin range ...

Before homing "error:7" appears 2 times due to startup blocks are empty. It's ok. To eliminate this: set the startup blocks or comment definition in config.h You can also use UART (TX1, RX1) instead ...