As I've experimented and played with a lot of different sensors, I've discovered that these basic devices can be built for ...

Hi, I'm Bill. I'm a software developer with a passion for making and electronics. I do a lot of things and here is where I ...

Arduino Motion Sensor – Circuit and Working The circuit diagram of the automation device using a motion sensor is shown in Fig. 2. It consists of an Arduino Nano board (MOD1), a PIR sensor (S1), a ...

Five sensors have been used in this research such as ECG (Electrocardiography), Oxygen saturation (SPO 2), Passive Infrared Sensor (PIR), Temperature-Humidity Sensor (DHT11/DHT22 and HS1101), Digital ...

ESP8266 Telegram Motion Detector: A DIY home security system utilizing ESP8266 microcontroller, PIR sensor, and Telegram messaging service for real-time motion detection alerts. Easily configurable ...

Present consists of just a PIR sensor and Arduino in a 3D printed enclosure to snap onto your monitor.

The Components Used in this project are:- Arduino Uno PIR Motion Sensor Jumper Wires HC-SR501 PIR Motion Sensor Pinout The PIR motion sensor consists of 3 pins-VCC, GND, and the Data Output Pin. VCC ...

The real-time PIR sensor in Proteus senses the motion of a particular area. As Proteus is the EDA, to show the motion, a TestPin is present on the sensor. I used the toggle pin here to indicate the ...

Pinout diagram The board is somewhat similar to the company’s Bee S3 board which comes without a PIR motion sensor and fewer I/Os. The Bee Motion S3 can be programmed with Arduino, CircuitPython, and ...

PIR sensor — Input The wiring for the PIR sensor is straightforward: VCC, output,and ground. Two wires were soldered to the power and ground rails on the breadboard while the output wire was soldered ...