Onsemi’s Hyperlux ID iToF sensor provides long-distance measurement and 3D imaging of fast-moving objects for industrial ...

The below circuit diagram shows the complete hardware wiring setup of the Arduino-based Smart Walking Stick for the Blind ...

It uses the STM32WB5MM-DK board with multiple sensors and Zigbee communication, alongside software like Node-RED and Zigbee2MQTT for automation and remote control. The project was entered in the ST ...

The principle of LiDAR is to point the laser at a surface, then sending out a short laser pulse and measuring the time it takes the light to return to its sensor, calculating the distance using ...

By the end of the guide, you’ll not only have a fully functional bidirectional counter but also gain hands-on experience with IR sensors,16x2 LCD display, Arduino programming, and some ...

Abstract: This article presents a highly sensitive proximity sensor with micrometer-scale resolution. The working principle is the change in the capacitance of a movable step-impedance resonator (SIR) ...

The SparkFun Ultrasonic Distance Sensor - TCT40 (sen-24805) a user-friendly upgrade to the popular HC-SR04 sensor, offers non-contact distance measurement from 2cm to 400cm with an accuracy of 3mm.

To allow automatic handling of all Bresser weather station variants, the decoders are tried in the following order until decoding succeeded: 7-in-1-Decoder 6-in-1-Decoder 5-in-1 Decoder Lightning ...

Data from tactile and proximity sensors were recorded through an Arduino Mega ADK micro-controller, connected via a USB port, at 400 Hz. These data were later synchronized with the absolute position ...